Partition 1 (image1) not upgrading
schmitgreg
Member Posts: 3
in Settings
Image2 is primary boot partition, so that's good, but image1 will not upgrade. I don't use Harmony; I SSH'd into it and have tried fw force-update / fw update / reboot-rinse-repeat several times leaving up to 20 minutes for it to stay on to copy over.
Any advise? Are there any useful hidden commands to manually flash the partition?
Thanks,
Greg S.
WAV, Inc.
Comments
Hi Greg,
From the AP Firmware 1.0.0.0.89 only one of the partition(Primary boot Partition) gets upgraded which is the intended behavior.
Thanks
Ramesh
Intended behavior? So there is no way to force the backup partition to upgrade?
[email protected] ~
$ plink 192.168.108.206
login as: admin
Please login: xclaim-mfg
xclaim-mfg
password : mfg-admin12
Copyright(C) 2005-2014 Xclaim Wireless, Inc. All Rights Reserved.
** Xi-3 / BIG WIFI. Small Business.: 471494205169
xclaim : fw show all
fw show all
control file /writable/fw/main.cntl not in flash
current primary boot image is Image2
---------------
Magic: RCKS
next_image: 0x130000
invalid: 0
hdr_len: 160
compression: l7
load_address: 0x80080000
entry_point: 0x802EF470
timestamp: Wed Oct 29 11:21:51 2014
binl7_len: 9641824
hdr_version: 3
hdr_cksum: 0x147E
version: 1.0.0.0.32 ( 1.0.0.0.32 )
MD5: 6B92FDBD6F2CA45B30E1ACEE1866E2F7
product: 11n-scorp-x (0)
architecture: 1
chipset: 0
board_type: 0
board_class: 3
customer:
---------------
Magic: RCKS
next_image: 0x130000
invalid: 0
hdr_len: 160
compression: l7
load_address: 0x80080000
entry_point: 0x802EF4E0
timestamp: Sat Feb 21 01:38:59 2015
binl7_len: 9572192
hdr_version: 3
hdr_cksum: 0x37FD
version: 1.0.0.0.89 ( 1.0.0.0.89 )
MD5: EA7743CDEB52342A733DD9E6CB1DBD8A
product: 11n-scorp-x (0)
architecture: 1
chipset: 0
board_type: 0
board_class: 3
customer:
OK
xclaim :